dummyhead
dummyhead
Remove the water pump drain bolt [1] and sealing
washer [2], then drain the coolant.
Reinstall the drain bolt with new sealing washer.
Tighten the drain bolt to the specified torque.
TORQUE:
Water pump drain bolt:
13 N·m (1.3 kgf·m, 10 lbf·ft)
Disconnect the siphon hose [1] from the radiator
reserve tank.
Empty the coolant and rinse the inside of the reserve
tank with water.
Connect the siphon hose onto the radiator reserve tank.
Fill the reserve tank with the recommended coolant
(page 3-13).
COOLING SYSTEM
[1]
[1]
[2]
8-5