dummyhead
dummyhead
LIGHTS/METERS/SWITCHES
HANDLEBAR SWITCH
LEFT HANDLEBAR SWITCH
CBR650RA:
Remove the left middle cowl (page 2-7).
Disconnect the left handlebar switch 10P (Gray)
connector [1].
Check for continuity between the switch side 10P
(Gray) connector terminals in each switch position
according to the continuity chart.
– ED, IIED, IIIED, IVED, FO, IIFO, KO, IIKO models
(page 23-2)
– MA, IIMA, TH, IITH, U, IIU, IIBR models (page 23-3)
CB650RA:
Remove the left shroud (page 2-10).
Disconnect the following:
– Left handlebar switch 14P (Gray) connector [1]
(Except IN model)
– Left handlebar switch 10P (Gray) connector (IN
model)
Check for continuity between the switch side connector
terminals in each switch position according to the
continuity chart.
– ED, IIIED, FO, KO models (page 23-4)
– MA, IN, TH, U, BR models (page 23-5)
RIGHT HANDLEBAR SWITCH
CBR650RA:
Remove the right middle cowl (page 2-7).
Disconnect the right handlebar switch 6P (Gray)
connector [1].
Check for continuity between the switch side 6P (Gray)
connector terminals in each switch position according to
the continuity chart.
– ED, IIED, IIIED, IVED, FO, IIFO, KO, IIKO models
(page 23-2)
– MA, IIMA, TH, IITH, U, IIU, IIBR models (page 23-3)
21-16
Except IN model shown:
[1]
[1]
[1]