Honda CBR650RA Shop Manual page 405

dummyhead dummyhead
BRAKE FLUID REPLACEMENT/AIR
BLEEDING
BRAKE FLUID DRAINING
Turn the handlebar so the reservoir is level.
For front brake:
Remove the following:
– Two screws [1]
– Reservoir cap [2]
– Set plate [3]
– Diaphragm [4]
Remove the bolt [1] and reservoir [2] from the stay.
For rear brake:
Remove the following:
– Two screws [3]
– Reservoir cap [4]
– Set plate [5]
– Diaphragm [6]
Temporarily install the reservoir onto the stay with the
Take care not to
mounting bolt.
spill the fluid out of
the reservoir.
Connect a bleed hose [1] to the caliper bleed valve [2].
Loosen the bleed valve and pump the brake lever or
pedal until no more fluid flows out of the bleed valve.
Close the bleed valve.
HYDRAULIC BRAKE
[1]
[2]
[3]
[2]
[1]
Front: Rear:
[2]
[1]
[1]
[3]
[4]
[4]
[5]
[6]
[2]
18-5