dummyhead
dummyhead
Clean the threads of the stem with a degreasing agent.
Install the following:
CBR650RA:
– Handlebars (page 16-5)
– Fork legs (page 16-21)
Make sure the steering stem moves smoothly, without
play or binding.
Install the top bridge [1], washer [2] and steering stem
CB650RA:
nut [3].
Temporarily install the fork legs into the bottom and top
Do not tighten the
bridges by tightening the bottom bridge pinch bolts.
top bridge pinch
bolts.
Tighten the stem nut to the specified torque.
TORQUE: 103 N·m (10.5 kgf·m, 76 lbf·ft)
Make sure the steering stem moves smoothly, without
play or binding.
Install the following:
– Stem cap [4]
– Fork legs (page 16-24)
– Handlebar (page 16-5)
– Ignition switch cover (page 21-15)
– Combination meter (page 21-6)
– Headlight (page 21-3)
FRONT WHEEL/SUSPENSION/STEERING
[4]
CB650RA:
[2]
[3]
[1]
16-43