Honda CBR650RA Shop Manual page 408

dummyhead dummyhead
HYDRAULIC BRAKE
BRAKE PAD/DISC
BRAKE PAD REMOVAL/
INSTALLATION
• Always replace the brake pads in pairs to ensure
even disc pressure.
• Check the fluid level in the reservoir as this
operation causes the fluid level to rise.
FRONT
Remove the brake caliper mounting bolts [1] and brake
Do not operate the
caliper [2].
brake lever after
removing the brake
caliper.
Push the caliper pistons all the way in to allow
installation of new brake pads by pushing the brake
pads [1] with a screwdriver or equivalent.
• Check the fluid level in the reservoir as this
operation causes the fluid level to rise.
18-8
Left side shown:
[2]
[1]
[1]