dummyhead
dummyhead
COOLING SYSTEM
THERMOSTAT CASE ASSEMBLY
REMOVAL/INSTALLATION
Remove the following:
– Radiator (page 8-8)
– Exhaust pipe/muffler (page 2-18)
Disconnect the following from the thermostat case joint:
– Lower radiator hose A [1]
– Lower radiator hose B [2]
– Oil cooler water hoses [3]
Remove the four bolts [4] and thermostat case
assembly [5].
Remove the O-ring [1] from the thermostat case
assembly [2].
Installation is in the reverse order of removal.
• Replace the O-ring with a new one.
• Do not apply engine oil to the O-ring.
Fill and bleed the cooling system (page 8-4).
8-12
[5]
[1]
[3]
[1]
[2]
[4]
[2]