Honda CBR650RA Shop Manual page 267

dummyhead dummyhead
Apply molybdenum oil solution to the camshaft journals,
lobes and thrust surfaces.
Install the cam chain [1] over the cam sprockets of the
intake [2] and exhaust [3] camshafts, making sure that
the timing marks [4] on the cam sprockets are flush with
the top surface [5] of the cylinder head.
• Install each camshaft to the correct locations with
the identification marks (page 10-8).
"IN" mark: Intake camshaft
"EX" mark: Exhaust camshaft
Coat new O-rings with oil and install them into the
grooves in the camshaft holders.
Apply molybdenum oil solution to the camshaft journals
of the camshaft holders.
Install each camshaft holder [1] to the correct locations
with the identification marks [2].
– No mark: right camshaft holder
– "R" mark: center camshaft holder
– "L" mark: left camshaft holder
CYLINDER HEAD/VALVES
[2]
[1]
[5]
[4]
[1]
[2]
[3]
10-9