Honda CBR650RA Shop Manual page 74

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
REAR FENDER B
REMOVAL/INSTALLATION
Remove the following:
– Fuel tank (page 7-7)
– Battery (page 20-5)
– Brake/tail light unit (page 21-5)
– Regulator/rectifier (page 20-7)
– USB charger unit (Except KO, IIKO, U, IIU, BR, II BR models) (page 21-25)
Release the following from the rear fender B [1]:
– Junction box cover [2]
– Starter relay switch [3]
– Fuse/relay box [4]
– Fuel pump 3P (Black) connector boss [5]
Release the seat lock cable [6] from the following:
– Setting holder [7]
– Seat lock key cylinder [8]
Remove the two bolts [9].
Slide the rear fender B downward and remove it out of the frame.
Remove the following:
– Setting plate [10]
– Seat lock key cylinder
– Setting holder
Installation is in the reverse order of removal.
[3]
[4]
[5]
2-14
[2]
[8]
[9]
[1]
[6]
[7]
[10]