Honda CBR650RA Shop Manual page 299

dummyhead dummyhead
Install the dowel pin [1] onto the shift drum.
Hold the stopper arm [2] using a screwdriver as shown.
Align the dowel pin
on the shift drum
Install the gearshift cam [3] while aligning its slot with
with the wide
the dowel pin.
groove on the
gearshift cam.
Apply a locking agent to the shift drum center socket
bolt [1] threads (page 1-17).
Tighten the socket bolt to the specified torque.
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
Install the thrust washer [1] and gearshift spindle
assembly [2] into the crankcase while aligning the
return spring ends with the crankcase stopper pin.
Apply a locking agent to the setting plate bolt [1]
threads (page 1-17).
Install the setting plate [2] and tighten the bolt securely.
CLUTCH/GEARSHIFT LINKAGE/STARTER CLUTCH
[2]
[2]
[1]
[1]
Align
[2] [1]
Align
[3]
[1]
11-21