Honda CBR650RA Shop Manual page 429

dummyhead dummyhead
2. Indicator Signal Line Open Circuit Inspection
Short the wire harness side ABS modulator 18P
(Black) connector [1] terminal to the ground with a
jumper wire [2].
TOOL:
Test probe
CONNECTION: 13 – Ground
Turn the ignition switch ON with the engine stop
switch " ".
Check the ABS indicator.
Does it go off?
YES
NO
3. Modulator Ground Line Open Circuit Inspection
Turn the ignition switch OFF.
Check for continuity between the wire harness side
ABS modulator 18P (Black) connector [1] terminal
and ground.
TOOL:
Test probe
CONNECTION: 10 – Ground
Is there continuity?
YES
NO
4. Fuse Inspection
Remove the fuse/relay box cover [1] and check the
ABS MAIN fuse (7.5 A) [2] for blown.
Is the fuse blown?
YES
NO
07ZAJ-RDJA110
– GO TO STEP 3.
– • Open circuit in the Orange/black wire
• Faulty combination
Orange/black wire is OK)
07ZAJ-RDJA110
– GO TO STEP 4.
– Open circuit in the Green wire
– GO TO STEP 5.
– GO TO STEP 6.
ANTI-LOCK BRAKE SYSTEM (ABS)
[1]
(Terminal side of the wire harness)
meter (if the
[1]
(Terminal side of the wire harness)
[2]
13
10
[1]
[2]
19-13