Honda CBR650RA Shop Manual page 380

dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Completely extend the outer tube.
Install and tighten the fork cap [1] into the outer tube.
Install the stopper ring [2] being careful not to scratch
the outer tube (CBR650RA).
Tighten the fork cap to the specified torque after
installing the fork leg into the steering stem (page 16-
21).
STEERING STEM
REMOVAL
Remove the following:
CBR650RA:
– Handlebars (page 16-5)
– Fork legs (page 16-21)
Remove the following:
CB650RA:
– Handlebar (page 16-5)
– Headlight (page 21-3)
– Combination meter (page 21-6)
– Ignition switch cover (page 21-15)
– Cap [1]
– Steering stem nut [2]
– Washer [3]
– Top bridge [4]
– Fork legs (page 16-23)
Remove the bolts [1] and headlight lower stay [2].
CB650RA:
Straighten the lock washer tabs [1].
Remove the lock nut [2] and lock washer.
16-38
[1]
CB650RA: [1]
[3]
[2]
[1]
[1]
[2]
[4]
[2]
[2]