Table of Contents
Advertisement
CIM Prefix: IMM CIM ID: 0057
User Action:
Information only; no action is required.
• FQXSPNM4031I: IPv6 static address of network interface modified from [arg1] to [arg2] by user
[arg3].
A user modifies the IPv6 static address of a Management Controller
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0058
User Action:
Information only; no action is required.
• FQXSPNM4032I: DHCPv6 failure, no IP address assigned.
S DHCP6 server fails to assign an IP address to a Management Controller.
Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0059
User Action:
Complete the following steps until the problem is solved:
1. Make sure that the BMC network cable is connected.
2. Make sure that there is a DHCPv6 server on the network that can assign an IP address to the BMC.
• FQXSPNM4033I: Telnet port number changed from [arg1] to [arg2] by user [arg3].
A user has modified the telnet port number
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0061
User Action:
Information only; no action is required.
• FQXSPNM4034I: SSH port number changed from [arg1] to [arg2] by user [arg3].
A user has modified the SSH port number
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
.
Chapter 2
XClarity Controller events
75
Advertisement
Table of Contents
