Table of Contents
Advertisement
User Action:
Information only; no action is required.
• FQXSPSR0001N: Sensor [SensorElementName] has transitioned to non-recoverable from a less
severe state.
This message is for the use case when an implementation has detected a Sensor transitioned to non-
recoverable from less severe.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Hard Disk drive
SNMP Trap ID: 5
CIM Prefix: PLAT CIM ID: 0524
User Action:
Check the status of all virtual disks on the system, resolve the problem according to LSI MegaRAID
software user guide.
• FQXSPSS4000I: Management Controller Test Alert Generated by [arg1].
This message is for the use case where a user has generated a Test Alert.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0040
User Action:
Information only; no action is required.
• FQXSPSS4001I: Server General Settings set by user [arg1]: Name=[arg2], Contact=[arg3],
Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-position=[arg7], Address=[arg8].
A user configured the Location setting
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0080
User Action:
Information only; no action is required.
• FQXSPSS4002I: License key for [arg1] added by user [arg2].
A user installs License Key
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0096
.
Chapter 2
XClarity Controller events
145
Advertisement
Table of Contents
