Lenovo 7D9F Manual page 172

Messages and codes reference
Hide thumbs Also See for 7D9F:
Table of Contents

Advertisement

Table 3. Events organized by severity (continued)
Message String
Event ID
FQXSFPU0023G
Secure Boot Image Verification Failure Warning.
FQXSFPU4033F
TPM Firmware recovery is in progress. Please DO NOT power off or
reset system.
FQXSFPU4035M
TPM Firmware recovery failed. TPM chip may be damaged.
FQXSFPU4040M
TPM selftest has failed.
FQXSFPU4043G
TPM Firmware update aborted. System is rebooting...
Physical Presence is not asserted, abort TPM Firmware upgrade.
FQXSFPU4045G
FQXSFPU4050G
Failed to update TPM Firmware.
FQXSFPU4051G
Undefined TPM_POLICY found
FQXSFPU4052G
TPM_POLICY is not locked
FQXSFPU4053G
System TPM_POLICY does not match the planar.
FQXSFPU4054G
TPM card logical binding has failed.
FQXSFPU4072G
Platform secure boot policy is not defined.
FQXSFPU4073G
Platform secure boot fuse is enabled but CPU 1 unfused.
FQXSFPU4074G
Platform secure boot fuse is enabled but CPU 2 unfused.
FQXSFPU4075G
Platform secure boot fuse is enabled but CPU 1,2 unfused.
FQXSFPU4076G
Platform secure boot fuse is disabled but CPU 1 fused.
FQXSFPU4077G
Platform secure boot fuse is disabled but CPU 2 fused.
FQXSFPU4078G
Platform secure boot fuse is disabled but CPU 1,2 fused.
FQXSFSM0002N
Boot Permission denied by Management Module: System Halted.
FQXSFSM0003N
Timed Out waiting on boot permission from Management Module:
System Halted.
FQXSFSM0004M
An XCC communication failure has occurred.
FQXSFSR0001M
[arg1] GPT corruption detected, DiskGUID: [arg2]
FQXSFSR0003G
The number of boot attempts has been exceeded. No bootable
device found.
FQXSFTR0001L
An invalid date and time have been detected.
FQXSFDD0004M
DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required
Controller.
FQXSFDD0012K
SATA Hard Drive Error: [arg1].
FQXSFIO0005M
An intra-board UPI failure has been detected on the link between
processor [arg1] port [arg2] and processor [arg3] port [arg4].
FQXSFIO0010M
An Uncorrectable PCIe Error has Occurred at Bus [arg1] Device [arg2]
Function [arg3]. The Vendor ID for the device is [arg4] and the Device
ID is [arg5]. The physical [arg6] number is [arg7].
FQXSFIO0011M
A PCIe parity error has occurred on Bus [arg1] Device [arg2] Function
[arg3]. The Vendor ID for the device is [arg4] and the Device ID is
[arg5]. The Physical slot number is [arg6].
168
ThinkSystem SR655 V3 Messages and Codes Reference
Severity
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Error
Error
Error
Error
Error

Advertisement

Table of Contents
loading

This manual is also suitable for:

7d9eThinksystem sr655 v3

Table of Contents