Lenovo 7D9F Manual page 57

UEFI deployment boot mode is enabled for NextBoot
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0197
User Action:
Information only; no action is required.
• FQXSPFC4004I: UEFI deployment boot mode is enabled for NextAc.
UEFI deployment boot mode is enabled for NextAC
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0198
User Action:
Information only; no action is required.
• FQXSPFC4005I: UEFI deployment boot mode has been disabled.
UEFI deployment boot mode has been disabled
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0199
User Action:
Information only; no action is required.
• FQXSPFW0000N: The System [ComputerSystemElementName] encountered a POST Error.
This message is for the use case when an implementation has detected a Post Error.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0184
User Action:
This is a UEFI detected event. The UEFI(POST) error code for this event can be found in the logged XCC
message text. Please refer to the UEFI(POST) error code in the "UEFI(POST) error code" section of the
Information Center for the appropriate user response.
• FQXSPFW0004I: UEFI advanced memory test is running.
.
Chapter 2 XClarity Controller events
53