Table of Contents
Advertisement
User Action:
Information only; no action is required.
• FQXSPEM4031I: SSD wear threshold setting is changed from [arg1] to [arg2] by user [arg3] from
[arg4] at IP address [arg5].
SSD wear threshold setting is changed by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0273
User Action:
Information only; no action is required.
• FQXSPEM4032I: Acoustic Mode [arg1] has been engaged. Fan speed limits are in place.
This message is for the use case where Acoustic Mode is engaged.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0274
User Action:
Information only; no action is required.
• FQXSPEM4033I: Acoustic Mode [arg1] has been disengaged to allow adequate cooling.
This message is for the use case where Acoustic Mode is disengaged.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0275
User Action:
Information only; no action is required.
• FQXSPEM4041I: The SmartNIC in slot [arg1] encountered boot timeout.
SmartNIC in a certain slot encountered boot timeout
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0312
User Action:
.
Chapter 2
XClarity Controller events
51
Advertisement
Table of Contents
