Table of Contents
Advertisement
User Action:
Complete the following steps until the problem is solved:
1. Check if there is a drive failed. If yes, replace the failed drive.
2. If the problem persists, collect service data log from the XCC WebGUI and contact Lenovo Support.
• FQXSPUN0055M: The RAID controller in PCI slot [arg1] is in critical state. Battery is in non-optimal
state.
This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0522
User Action:
Complete the following steps until the problem is solved:
1. Check whether a RAID battery is installed and attached.
2. If no RAID battery is installed, please ignore this message.
3. If a RAID battery is installed, check the RAID battery for air flow obstruction and ensure that battery
cables are properly connected.
4. If the problem persists, collect service data log from the XCC WebGUI and contact Lenovo Support.
• FQXSPUN0058J: The remaining life for [arg1] is lower than the threshold [arg2].
This message is for the use case when an implementation has detected the remaining life of any one of
the SSDs in the system is lower than the defined threshold.
Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0520
User Action:
Capture service log and contact Support for a drive replacement
• FQXSPUN0059J: Sensor [SensorElementName] has transitioned from normal to warning state.
This message is for the use case when an implementation has detected a Sensor transitioned to non-
critical from normal.
Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0520
User Action:
.
Chapter 2
XClarity Controller events
155
Advertisement
Table of Contents
