Lenovo 7D9F Manual page 154

Messages and codes reference
Hide thumbs Also See for 7D9F:
Table of Contents

Advertisement

Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0509
User Action:
Information only; no action is required.
• FQXSPUN0018J: Sensor [SensorElementName] has transitioned from normal to non-critical state.
This message is for the use case when an implementation has detected a Sensor transitioned to non-
critical from normal.
Severity: Warning
Serviceable: Yes
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0520
User Action:
Complete the following steps until the problem is solved:
1. If the sensor is "UEFI Auth Fail":
a. Check if there is a de-asserted event triggered after this event is asserted before entering the OS.
b. If yes, ignore this event because this problem is fixed by recovery algorithm.
c. If no, collect service data log right after this event triggered.
d. Contact Lenovo Support
2. If the sensor is "RAID Vol State":
a. Check whether there is any physical drive removed unexpectedly. Make sure that the drives are
installed correctly in the same sequence as original VD creation.
b. If the problem remains the same after physical check, boot the system in OS (if the original OS is
corrupted, try to use external storage) to collect LXCE log and FFDC log during the failure.
c. Contact Lenovo Support.
3. If the sensor is ""XCC DB Status"":
a. Reboot XCC and see if the problem is still observed.
b. Monitor the system to see if the problem occurs frequently, biweekly or higher frequency.
c. If yes, please collect service data log from the XCC WebGUI and contact Lenovo Support.
• FQXSPUN0019M: Sensor [SensorElementName] has transitioned to critical from a less severe
state.
This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0522
User Action:
150
ThinkSystem SR655 V3 Messages and Codes Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

7d9eThinksystem sr655 v3

Table of Contents