Table of Contents
Advertisement
CIM Prefix: PLAT CIM ID: 0807
User Action:
Information only; no action is required.
• FQXSPMA2019I: Non-redundant:Insufficient Resources for [RedundancySetElementName] has
deasserted.
This message is for the use case when a Redundancy Set has transitioned from Non-redundant:
Insufficient Resources.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Memory
SNMP Trap ID: 41
CIM Prefix: PLAT CIM ID: 0811
User Action:
Information only; no action is required.
• FQXSPMA2024I: Sensor [SensorElementName] has deasserted.
This message is for the use case when an implementation has detected a Sensor has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Memory
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0509
User Action:
Information only; no action is required.
• FQXSPNM4000I: Management Controller [arg1] Network Initialization Complete.
This message is for the use case where a Management Controller network has completed initialization.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - IMM Network event
SNMP Trap ID: 37
CIM Prefix: IMM CIM ID: 0001
User Action:
Information only; no action is required.
• FQXSPNM4001I: Ethernet Data Rate modified from [arg1] to [arg2] by user [arg3].
This message is for the use case where a user modifies the Ethernet Port data rate.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0003
.
Chapter 2
XClarity Controller events
67
Advertisement
Table of Contents
