Lenovo 7D9F Manual page 60

SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0764
User Action:
This is a UEFI detected event. The UEFI(POST) error code for this event can be found in the logged BMC
message text. Please refer to the UEFI(POST) error code in the "UEFI(POST) error code" section of the
Information Center for the appropriate user response.
• FQXSPIO0003N: A diagnostic interrupt has occurred on system [ComputerSystemElementName].
This message is for the use case when an implementation has detected a Front Panel NMI / Diagnostic
Interrupt.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0222
User Action:
1. If the NMI button on the operator information panel has not been pressed, complete the following
steps:
2. Make sure that the NMI button is not pressed.
3. (Trained technician only) Replace the system I/O board.
• FQXSPIO0004L: A bus timeout has occurred on bus [SensorElementName].
This message is for the use case when an implementation has detected a Bus Timeout.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0224
User Action:
Complete the following steps:
1. Collect Service Data log.
2. Reseat processor.
3. If the problem still exist, please replace the processor. (trained technician only)
• FQXSPIO0006N: A software NMI has occurred on system [ComputerSystemElementName].
This message is for the use case when an implementation has detected a Software NMI.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0228
User Action:
Complete the following steps until the problem is solved:
56
ThinkSystem SR655 V3 Messages and Codes Reference