Table of Contents
Advertisement
1. Change SystemOobCustom.SkipAhciFreezeLock from Disable to Enable using OneCLI tool.(use
OneCLI command "OneCli config set SystemOobCustom.SkipAhciFreezeLock "Enabled" --imm
IMM_USERID:IMM_PASSWORD@IMM_IP --override").
2. Reboot the system into OS.
• FQXSFPU4060I: Skipped freezing lock of AHCI-attached SATA drives.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4061I: Restored default locking behavior of AHCI-attached SATA drives.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4070I: Platform secure boot fuse is enabled.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4071I: Platform secure boot fuse is disabled.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU4072G: Platform secure boot policy is not defined.
Severity: Warning
User Action:
Contact Lenovo Support.
• FQXSFPU4073G: Platform secure boot fuse is enabled but CPU 1 unfused.
Severity: Warning
User Action:
Complete the following steps:
1. If a CPU has been replaced with a new one, roll back the original CPU and reboot the system.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU4074G: Platform secure boot fuse is enabled but CPU 2 unfused.
Severity: Warning
User Action:
Complete the following steps:
1. If a CPU has been replaced with a new one, roll back the original CPU and reboot the system.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU4075G: Platform secure boot fuse is enabled but CPU 1,2 unfused.
Severity: Warning
.
187
Chapter 3
UEFI events
Advertisement
Table of Contents
