Lenovo 7D9F Manual page 116

SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0113
User Action:
Information only; no action is required.
• FQXSPPW2017I: Power supply [arg1] in the enclosure/chassis (MTM-SN: [arg2])has returned to a
normal input state.
This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0099
User Action:
Information only; no action is required.
• FQXSPPW2031I: Numeric sensor [NumericSensorElementName] going low (lower non-critical) has
deasserted.
This message is for the use case when an implementation has detected a Lower Non-critical sensor going
low has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Voltage
SNMP Trap ID: 13
CIM Prefix: PLAT CIM ID: 0477
User Action:
Information only; no action is required.
• FQXSPPW2035I: Numeric sensor [NumericSensorElementName] going low (lower critical) has
deasserted.
This message is for the use case when an implementation has detected a Lower Critical sensor going low
has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Voltage
SNMP Trap ID: 1
CIM Prefix: PLAT CIM ID: 0481
User Action:
Information only; no action is required.
• FQXSPPW2047I: Numeric sensor [NumericSensorElementName] going high (upper critical) has
deasserted.
112
ThinkSystem SR655 V3 Messages and Codes Reference