Table of Contents
Advertisement
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0099
User Action:
Information only; no action is required.
• FQXSPPW2006I: [PowerSupplyElementName] has returned to a Normal Input State.
This message is for the use case when an implementation has detected a Power Supply that has input
that has returned to normal.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0099
User Action:
Information only; no action is required.
• FQXSPPW2007I: [PowerSupplyElementName] Configuration is OK.
This message is for the use case when an implementation when a Power Supply configuration is OK.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0105
User Action:
Information only; no action is required.
• FQXSPPW2008I: [PowerSupplyElementName] has been turned on.
This message is for the use case when an implementation has detected a Power Unit that has been
Enabled.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Power On
SNMP Trap ID: 24
CIM Prefix: PLAT CIM ID: 0107
User Action:
Information only; no action is required.
• FQXSPPW2011I: [PowerSupplyElementName] power was restored.
This message is for the use case when an implementation has detected a power was restore to the Power
Unit.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
.
Chapter 2
XClarity Controller events
111
Advertisement
Table of Contents
