Lenovo 7D9F Manual page 171

Table 3. Events organized by severity (continued)
Message String
Event ID
FQXSFDD0001G DRIVER HEALTH PROTOCOL: Missing Configuration. Requires
Change Settings From F1.
FQXSFDD0002M DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller.
FQXSFDD0003I DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
FQXSFDD0005M DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires
'Reboot'.
FQXSFDD0006M DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver.
FQXSFDD0007G Security Key Lifecycle Manager (SKLM) IPMI Error.
FQXSFIO0013I The device found at Bus [arg1] Device [arg2] Function [arg3] could not
be configured due to resource constraints. The Vendor ID for the
device is [arg4] and the Device ID is [arg5]. The physical slot number
is [arg6].
FQXSFIO0021J PCIe Error Recovery has occurred in physical [arg1] number [arg2].
The [arg3] may not operate correctly.
FQXSFIO0022J PCIe Link Width has degraded from [arg1] to [arg2] in physical [arg3]
number [arg4].
FQXSFIO0023J PCIe Link Speed has degraded from [arg1] to [arg2] in physical [arg3]
number [arg4].
FQXSFIO0029G Correctable CPU link error has been detected on processor [arg1].
FQXSFMA0012L The [arg1] PFA Threshold limit has been exceeded on DIMM [arg2] at
address [arg3]. [arg4]
FQXSFMA0026G Multi-bit CE occurred on DIMM [arg1], need to restart the system for
DIMM Self-healing to attempt post package repair (PPR)
FQXSFMA0027G Multi-bit CE occurred on DIMM [arg1] different rows.[arg2]
FQXSFMA0027M DIMM [arg1] Self-healing, attempt post package repair (PPR) failed at
Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on Device [arg6].
[arg7]
FQXSFMA0028M DIMM [arg1] Self-healing, attempt post package repair (PPR)
exceeded DIMM level threshold [arg2] at Rank [arg3] Sub Rank [arg4]
Bank [arg5] Row [arg6] on Device [arg7]. [arg8]
FQXSFMA0048M DIMM [arg1] disabled due to PMIC failure during POST, DIMM
identifier is [arg2].
FQXSFMA0050G DRAM PFA threshold limit exceeded on DIMM [arg1] sub-channel
[arg2] Rank [arg3] DRAM [arg4], DIMM identifier is [arg5].
FQXSFMA0057G Page Retire PFA Threshold limit exceeded on DIMM [arg1] at address
[arg2].[arg3] [arg4]
FQXSFMA0067G Errors per row counter threshold limit exceeded on DIMM [arg1] sub-
channel [arg2] Rank [arg3] DRAM [arg4], need to restart the system for
DIMM Self-healing to attempt post package repair (PPR), DIMM
identifier is [arg5].
FQXSFPU0021G Hardware physical presence is in asserted state.
FQXSFPU0022G The TPM configuration is not locked.
Severity
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
. 167
Chapter 3 UEFI events