Lenovo 7D9F Manual page 12

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPBR400BI Management Controller [arg1]: cloning configuration from neighbor
server [arg2] by group name [arg3] failed to complete.
FQXSPBR400CI Management Controller [arg1]: cloning configuration from neighbor
server [arg2] by group name [arg3] failed to start.
FQXSPBR400DI Neighbor group clone configuration was initiated by user [arg1].
FQXSPBR400EI Neighbor group firmware update was initiated by user [arg1].
FQXSPBR400FI The neighbor group management is [arg1] by user [arg2] from [arg3] at
IP address [arg4].
FQXSPBT0007I No bootable media available for system
[ComputerSystemElementName].
FQXSPCA0012I Sensor [SensorElementName] has transitioned to normal state.
FQXSPCA0013I Sensor [SensorElementName] has transitioned to normal state.
FQXSPCA2002I Numeric sensor [NumericSensorElementName] going low (lower
critical) has deasserted.
FQXSPCA2007I Numeric sensor [NumericSensorElementName] going high (upper
non-critical) has deasserted.
FQXSPCA2009I Numeric sensor [NumericSensorElementName] going high (upper
critical) has deasserted.
FQXSPCA2011I Numeric sensor [NumericSensorElementName] going high (upper
non-recoverable) has deasserted.
FQXSPCA2016I Sensor [SensorElementName] has transitioned to a less severe state
from critical.
FQXSPCA2017I Sensor [SensorElementName] has transitioned to a less severe state
from critical.
FQXSPCN4000I Serial Redirection set by user [arg1]: Mode=[arg2], BaudRate=[arg3],
StopBits=[arg4], Parity=[arg5], SessionTerminateSequence=[arg6].
FQXSPCN4001I Remote Control session started by user [arg1] in [arg2] mode.
FQXSPCN4002I User [arg1] has terminated an active console session.
FQXSPCN4003I Remote Control session started by user [arg1] in [arg2] mode has
been closed.
FQXSPDA2000I The System [ComputerSystemElementName] has detected a POST
Error deassertion.
FQXSPDM4000I Inventory data changed for device [arg1], new device data hash=
[arg2], new master data hash=[arg3] .
FQXSPDM4001I Storage [arg1] has changed.
FQXSPDM4003I TKLM servers set by user [arg1]: TKLMServer1=[arg2] Port=[arg3],
TKLMServer2=[arg4] Port=[arg5], TKLMServer3=[arg6] Port=[arg7],
TKLMServer4=[arg8] Port=[arg9].
FQXSPDM4004I TKLM servers device group set by user [arg1]:
TKLMServerDeviceGroup=[arg2] .
FQXSPDM4005I User [arg1] has generated a new encryption key pair and installed a
self-signed certificate for the TKLM client.
8
ThinkSystem SR655 V3 Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational