Lenovo ThinkSystem SD665 V3 Neptune DWC Configuration Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Server
  5. ThinkSystem SD665 V3 Neptune DWC
  6. Configuration manual

Lenovo ThinkSystem SD665 V3 Neptune DWC Configuration Manual

Hide thumbs Also See for ThinkSystem SD665 V3 Neptune DWC:
Table of Contents

Advertisement

Quick Links

Download this manual
ThinkSystem SD665 V3 Neptune DWC Tray
System Configuration Guide
Machine Types: 7D9P

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ThinkSystem SD665 V3 Neptune DWC

Summary of Contents for Lenovo ThinkSystem SD665 V3 Neptune DWC

  • Page 1 ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide Machine Types: 7D9P...
  • Page 2 Before using this information and the product it supports, be sure to read and understand the safety information and the safety instructions, which are available at: http://thinksystem.lenovofiles.com/help/topic/safety_documentation/pdf_files.html In addition, be sure that you are familiar with the terms and conditions of the Lenovo warranty for your server, which can be found at: http://datacentersupport.lenovo.com/warrantylookup First Edition (December 2022) ©...

  • Page 3: Table Of Contents

    Safety inspection checklist ... iv Set the network connection for the Lenovo XClarity Controller ....
  • Page 4 ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 5: Safety

    Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza. Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet. Antes de instalar este produto, leia as Informações sobre Segurança. © Copyright Lenovo 2022...

  • Page 6: Safety Inspection Checklist

    1 & IEC 60950-1, the standard for Safety of Electronic Equipment within the Field of Audio/Video, Information Technology and Communication Technology. Lenovo assumes you are qualified in the servicing of equipment and trained in recognizing hazards energy levels in products. Access to the equipment is by the use of a tool, lock and key, or other means of security, and is controlled by the authority responsible for the location.
  • Page 7 Click Power ➙ Power Cables to see all line cords. • Make sure that the insulation is not frayed or worn. 3. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations.
  • Page 8 ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 9: Chapter 1. Server Components

    Use this button only when you are directed to do so by Lenovo Support. PCIe slot 1 or drive bay 0/1. See “Hardware 1 Gb RJ45 Ethernet port with share-NIC feature for Lenovo replacement procedures” in User Guide or XClarity Controller. See “Front LEDs”...

  • Page 10: Top View

    Hardware Replacement Guide for for component replacement. Processor cold plates Front cam handle Memory module cooling tube KVM breakout cable Use this information for details about the KVM breakout cable. ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 11: System-Board Layout

    Use the KVM breakout cable to connect external I/O devices to the compute node. The KVM breakout cable connects through the KVM connector (see “Front view” on page 1). The KVM breakout cable has connectors for a display device (video), one USB 3.0 (5 Gbps) connectors for a USB keyboard and mouse, and a serial interface connector.

  • Page 12: System-Board Switches

    Power and sideband signal connector for slot 1 or drive bay 0/1 PCIe 6 (reserved) PCIe 7 – M.2 connector System-board switches The following illustration shows the location and description of the switches. Important: ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 13: Pcie Slot Numbering

    1. Before you change any switch settings or move any jumpers, turn off the solution; then, disconnect all power cords and external cables. Review the following information: • http://thinksystem.lenovofiles.com/help/topic/safety_documentation/pdf_files.html • “Installation Guidelines”, “Handling static sensitive devices”, and “Power off the solution ” in User Guide or Hardware Maintenance Guide.

  • Page 14: System Leds And Diagnostics Display

    1 Gb Ethernet port activity LED (green) Node power button with LED (green) 25 Gb Ethernet port link and activity LED (green): Use this green LED to distinguish the network status. Off: The network is disconnected. ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 15: External Diagnostics Handset

    XCC event log for additional information. Identification LED (blue): Use this blue LED to visually locate the node among other nodes. This LED is also used as a presence detection button. You can use Lenovo XClarity Administrator to light this LED remotely.
  • Page 16 Press the plastic clip on the plug forward. Hold the clip and remove the cable from the connector. Display panel overview The diagnostics device consists of an LCD display and 5 navigation buttons. ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...
  • Page 17 LCD display Scroll buttons (up/down/left/right) Press the scroll buttons to locate and select system information. Select button Press the select button to select from the options in the menu. Option flow diagram The LCD panel displays various system information. Navigate through the options with the scroll keys. Depending on the model, the options and entries on the LCD display might be different.
  • Page 18 Following is the list of available options. Switch between an option and the subordinate information entries with the select button, and switch among options or information entries with the scroll buttons. Depending on the model, the options and entries on the LCD display might be different. ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...
  • Page 19 Home Menu (System Status Dashboard) Home Menu Example System name System status Active alert quantity Temperature Power consumption Checkpoint code Active Alerts Sub Menu Example Home screen: Active error quantity Note: The “Active Alerts” menu displays only the quantity 1 Active Alerts of active errors.
  • Page 20 • Static IPv6 IP IPv4 Network Mask: • Current IPv6 Gateway x.x.x.x • IPv6 DNS IPv4 Default Gateway: Note: Only the MAC address that is currently in use is x.x.x.x displayed (extension or shared). ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 21: System Management Module 2 (Smm 2) Leds

    System Environmental Information Sub Menu Example Ambient Temp: 24 C Exhaust Temp: 30 C • Ambient temperature PSU1: Vin= 213 w • Exhaust temperature Inlet= 26 C • PSU status FAN1 Front: 21000 RPM • Spinning speed of fans by RPM FAN2 Front: 21000 RPM FAN3 Front: 21000 RPM FAN4 Front: 21000 RPM...
  • Page 22 Ethernet port 1 activity (RJ-45) LED: When this LED is flashing (green), it indicates that there is an activity through the remote management and console (Ethernet) port 1 over the management network. ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 23: Power Supply Leds

    Power supply LEDs This topic provides information about various power supply LED status and corresponding action suggestions. The following minimal configuration is required for the solution to start: • One DW612S Enclosure • One SD665 V3 tray (with two compute nodes) •...

  • Page 24: Dwc Power Supply Leds

    V ac power supply in a enclosure that is powered by 100 - 127 V ac power supplies, the 200 - 240 V ac power supply will not power on. The following illustration shows the LEDs on the DWC power supply: ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 25: Drip Sensor Led

    Figure 11. DWC power supply LEDs Input (AC) power LED (green) Power supply error LED (yellow) Output (DC) power LED (green) There are nine LEDs on each DWC power supply (three per power supply bay): AC power LED (green): When this LED is lit (green), it indicates that ac power is being supplied to the DWC power supply in the corresponding power supply bay.

  • Page 26: System-Board Leds

    Drip sensor LED: When this LED is lit (yellow), it indicates that the drip sensor detects water in its respective catch basin. System-board LEDs The following illustrations show the light-emitting diodes (LEDs) on the system board. Figure 13. System-board LEDs ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...
  • Page 27 Table 11. System-board LEDs BMC (XCC heartbeat LED) (green) XCC heartbeat LED (green) behavior: Blinking slowly: XCC is functioning. Blinking rapidly and constantly: XCC is initializing or malfunctioning. On: XCC is malfunctioning. Off: XCC is malfunctioning. Chapter 1 Server components...
  • Page 28 ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 29: Chapter 2. Parts List

    Tier 1 CRU at your request with no service agreement, you will be charged for the installation. • Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your solution.
  • Page 30 2. Click Parts. 3. Enter the serial number to view a listing of parts for your solution. √ Tray cover √ Rear cross brace √ Power distribution board √ Water loop ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...
  • Page 31 Table 12. SD665 V3 parts list (continued) Index Description Tier 1 CRU Tier 2 Consuma- ble and Structural part √ DIMM comb √ DIMM tool √ Memory module √ Memory module filler √ DIMM cover √ Conduction plate kit √ System board √...

  • Page 32: Power Cords

    The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. • Power cords for a specific country or region are usually available only in that country or region. ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 33: Chapter 3. Unboxing And Setup

    They might be required to receive warranty service. Identify the solution and access the Lenovo XClarity Controller This section contains instruction on how to identify your solution and where to find the Lenovo XClarity Controller access information.
  • Page 34 Lenovo XClarity Controller network access label In addition, the Lenovo XClarity Controller network access label for both nodes can be found on the pull out information tag located at the front of the tray. You can use the information on the pull out tag to access the XCC MAC address and LLA for each node.
  • Page 35 Figure 17. Lenovo XClarity Controller network access label on the pull-out information tab Service Label and QR code In addition, the system Service Label is located on the inside surface of the tray cover, provides a quick response (QR) code for mobile access to service information. You can scan the QR code with a mobile device using a QR code reader application and get quick access to the Service Information web page.

  • Page 36: Solution Setup Checklist

    • You can press the power button. • The solution can restart automatically after a power interruption. • The solution can respond to remote power-on requests sent to the Lenovo XClarity Controller. Note: You can access the management processor interface to configure the system without powering on the solution.
  • Page 37 1. Set the network connection for theLenovo XClarity Controller to the management network. 2. Update the firmware for the solution, if necessary. 3. Configure the firmware for the solution. The following information is available for RAID configuration: • https://lenovopress.lenovo.com/lp0578-lenovo-raid-introduction • https://lenovopress.lenovo.com/lp0579-lenovo-raid-management-tools-and-resources 4. Install the operating system. 5. Back up the solution configuration.
  • Page 38 ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 39: Chapter 4. System Configuration

    The following methods are available to set the network connection for the Lenovo XClarity Controller if you are not using DHCP: • If a monitor is attached to the server, you can use Lenovo XClarity Provisioning Manager to set the network connection.

  • Page 40: Set Front Usb Port For Lenovo Xclarity Controller Connection

    • If you are using the Lenovo XClarity Administrator Mobile app from a mobile device, you can connect to the Lenovo XClarity Controller through the Lenovo XClarity Controller USB connector or USB 3.0 Console Breakout Cable. For location of Lenovo XClarity Controller USB connector and USB 3.0 Console Breakout Cable connector, see “Front view”...

  • Page 41: Update The Firmware

    Hat Enterprise Linux (RHEL) and SUSE Linux Enterprise Server (SLES) operating system distributions. Machine-type-specific firmware-only UXSPs are also available. Firmware updating tools See the following table to determine the best Lenovo tool to use for installing and setting up the firmware: Chapter 4 System configuration...
  • Page 42 √ √ √ Lenovo XClarity In-band All I/O Integrator (LXCI) for devices Microsoft System On-Target Center Configuration Manager Notes: 1. For I/O firmware updates. 2. For BMC and UEFI firmware updates. ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...
  • Page 43 • Lenovo XClarity Controller If you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specific server. Notes: – To perform an in-band update through Windows or Linux, the operating system driver must be installed and the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.

  • Page 44: Configure The Firmware

    Several options are available to install and set up the firmware for the server. Important: Do not configure option ROMs to be set to Legacy unless directed to do so by Lenovo Support. This setting prevents UEFI drivers for the slot devices from loading, which can cause negative side effects for Lenovo software, such as Lenovo XClarity Administrator and Lenovo XClarity Essentials OneCLI, and to the Lenovo XClarity Controller.

  • Page 45: Memory Module Configuration

    You can use the config application and commands to view the current system configuration settings and make changes to Lenovo XClarity Controller and UEFI. The saved configuration information can be used to replicate or restore other systems. For information about configuring the server using Lenovo XClarity Essentials OneCLI, see: http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_c_settings_info_commands.html...

  • Page 46: Deploy The Operating System

    • Red Hat Enterprise Linux • SUSE Linux Enterprise Server Complete list of available operating systems: https://lenovopress.lenovo.com/osig Tool-based deployment • Multi-server Available tools: – Lenovo XClarity Administrator http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/compute_node_image_deployment.html – Lenovo XClarity Essentials OneCLI ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 47: Back Up The Server Configuration

    – Lenovo XClarity Integrator deployment pack for SCCM (for Windows operating system only) https://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxci_deploypack_sccm.doc/dpsccm_c_endtoend_ deploy_scenario.html • Single-server Available tools: – Lenovo XClarity Provisioning Manager “OS Installation” section in the LXPM documentation compatible with your server at https:// sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html – Lenovo XClarity Essentials OneCLI http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_r_uxspi_proxy_tool.html...
  • Page 48 ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 49: Appendix A. Getting Help And Technical Assistance

    Appendix A. Getting help and technical assistance If you need help, service, or technical assistance or just want more information about Lenovo products, you will find a wide variety of sources available from Lenovo to assist you. On the World Wide Web, up-to-date information about Lenovo systems, optional devices, services, and support are available at: http://datacentersupport.lenovo.com...

  • Page 50: Collecting Service Data

    Collecting service data To clearly identify the root cause of a server issue or at the request of Lenovo Support, you might need collect service data that can be used for further analysis. Service data includes information such as event logs and hardware inventory.

  • Page 51: Contacting Support

    Support when certain serviceable events occur in Lenovo XClarity Administrator and the managed endpoints. You can choose to send diagnostic files to Lenovo Support using Call Home or to another service provider using SFTP. You can also manually collect diagnostic files, open a problem record, and send diagnostic files to the Lenovo Support.
  • Page 52 ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 53: Appendix B. Documents And Supports

    • Drivers and Software download website for ThinkSystem SD665 V3 – https://datacentersupport.lenovo.com/products/servers/thinksystem/sd665v3/7d9p/downloads/driver-list/ • Lenovo Data Center Forum – https://forums.lenovo.com/t5/Datacenter-Systems/ct-p/sv_eg • Lenovo Data Center Support for ThinkSystem SD665 V3 – https://datacentersupport.lenovo.com/products/servers/thinksystem/sd665v3/7d9p • Lenovo License Information Documents – https://datacentersupport.lenovo.com/documents/lnvo-eula • Lenovo Press website (Product Guides/Datasheets/White papers) –...
  • Page 54 • Operating System Installation Instructions – https://thinksystem.lenovofiles.com/help/topic/operating_system/installation_instructions.html • Submit an eTicket (service request) – https://support.lenovo.com/servicerequest • Subscribe to Lenovo Data Center Group product notifications (Stay up to date on firmware updates) – https://datacentersupport.lenovo.com/tw/en/solutions/ht509500 ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

  • Page 55: Appendix C. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.

  • Page 56: Trademarks

    (TBW). A device that has exceeded this limit might fail to respond to system-generated commands or might be incapable of being written to. Lenovo is not responsible for replacement of a device that has exceeded its maximum guaranteed number of program/erase cycles, as documented in the Official Published Specifications for the device.

  • Page 57: Taiwan Region Bsmi Rohs Declaration

    Taiwan region BSMI RoHS declaration Taiwan Region import and export contact information Contacts are available for Taiwan Region import and export information. Appendix C. Notices...
  • Page 58 ThinkSystem SD665 V3 Neptune DWC Tray System Configuration Guide...

This manual is also suitable for:

7d9p

Table of Contents