Lenovo 7D9F Manual page 185

Messages and codes reference
Hide thumbs Also See for 7D9F:
Table of Contents

Advertisement

Complete the following steps:
1. Check Lenovo Support site for an applicable service bulletin or UEFI firmware update that applies to
this processor error.
2. Reboot the system.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU0019N: An uncorrectable error has been detected on processor [arg1].
Severity: Error
User Action:
Complete the following steps:
1. Check Lenovo Support site for an applicable service bulletin or UEFI firmware update that applies to
this error.
2. Reboot the system.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU0021G: Hardware physical presence is in asserted state.
Severity: Warning
User Action:
Complete the following steps:
1. Complete any administrative tasks requiring the TPM physical presence switch to be in the "ON"
position.
2. Restore the physical presence switch to the "OFF" position and reboot the system.
3. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU0021I: The TPM physical presence state has been cleared.
Severity: Info
User Action:
Information only; no action is required.
• FQXSFPU0022G: The TPM configuration is not locked.
Severity: Warning
User Action:
Complete the following steps:
1. Reboot the system.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU0023G: Secure Boot Image Verification Failure Warning.
Severity: Warning
User Action:
Complete the following steps:
1. It's a security warning message when user want to boot from an unauthorized UEFI image or OS
while Secure Boot is enabled and Secure Boot Mode is in User Mode. If customer does not want to
boot any unauthorized UEFI image or OS, remove that bootable device.
.
181
Chapter 3
UEFI events

Advertisement

Table of Contents
loading

This manual is also suitable for:

7d9eThinksystem sr655 v3

Table of Contents