Table of Contents
Advertisement
User Action:
Information only; no action is required.
• FQXSPPP4047I: Management Controller [arg1] reset was initiated by user [arg2].
This message is for the use case where a Management Controller reset is initiated by a user.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0021
User Action:
Information only; no action is required.
• FQXSPPP4048I: Attempting to AC power cycle server [arg1] by user [arg2].
AC power cycle server
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0227
User Action:
Information only; no action is required.
• FQXSPPP4049I: Management Controller [arg1] reset was initiated by Front Panel.
Management Controller reset was initiated by Front Panel
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0252
User Action:
Information only; no action is required.
• FQXSPPP4050I: Management Controller [arg1] reset was initiated to activate PFR Firmware.
Management Controller reset was initiated to activate PFR Firmware.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0253
User Action:
Information only; no action is required.
.
Chapter 2
XClarity Controller events
97
Advertisement
Table of Contents
