Table of Contents
Advertisement
User Action:
Information only; no action is required.
• FQXSPSE4069I: LDAP set by user [arg1]: RootDN=[arg2], UIDSearchAttribute=[arg3],
BindingMethod=[arg4], TargetName=[arg5], GroupFilter=[arg6], GroupAttribute=[arg7],
LoginAttribute=[arg8].
A user configured an LDAP Miscellaneous setting
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0290
User Action:
Information only; no action is required.
• FQXSPSE4070I: Lockdown mode is [arg1] by user [arg2] from [arg3] at IP address [arg4].
A user enables or disables Lockdown mode
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0291
User Action:
Information only; no action is required.
• FQXSPSE4071I: Chassis Intrusion detection is [arg1] by user [arg2] from [arg3] at IP address
[arg4].
A user enables or disables Chassis Intrusion detection
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0292
User Action:
Information only; no action is required.
• FQXSPSE4072I: Random SED AK is regenerated by user [arg1] from [arg2] at IP address [arg3].
A user regenerates a random SED AK
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0294
.
Chapter 2
XClarity Controller events
143
Advertisement
Table of Contents
