Figure 4.43 L2 Switching > Spanning Tree > Stp Bridge Settings - Advantech EKI-9226G Series User Manual

4.5.10.3 STP Bridge Settings
The STP Bridge Settings page allows you to configure the priority, forward delay,
maximum age, Tx hold count, and the hello time for the bridge.
To access this page, click L2 Switching > Spanning Tree > STP Bridge Settings.
Figure 4.43 L2 Switching > Spanning Tree > STP Bridge Settings
The following table describes the items in the previous figure.
Item
Priority
Forward Delay
Max Age
Tx Hold Count
Hello Time
Apply
The ensuing table for STP Bridge Information settings are informational only: Prior-
ity, Forward Delay, Max Age, Tx Hold Count and Hello Time.
The ensuing table for STP Bridge Status settings are informational only: Bridge
Identifier, Designated Root Bridge, Root Path Cost, Designated Bridge, Root Port
and Last Topology Change.
EKI-9226G Series User Manual
Description
Click the drop-down menu to select the STP bridge priority.
Enter the variable (4 to 30) to set the forward delay for STP bridge set-
tings.
Enter the variable (6 to 40) to set the Max age for STP bridge settings.
Enter the variable (1 to 10) to designate the TX hold count for STP
bridge settings.
Enter the variable (1 to 10) to designate the Hello Time for STP bridge
settings.
Click Apply to save the values and update the screen.
61