Figure 4.136 Diagnostics > System Log > System Log Server - Advantech EKI-9226G Series User Manual

Item
Severity
Apply
The ensuing table for Local Logging Settings Status settings are informational
only: Status, Target, Severity and Delete (click to delete the desired target).
4.10.4.3 System Log Server
The System Log Server page allows you to configure the log server.
To access this page, click Diagnostics > System Log > System Log Server.
Figure 4.136 Diagnostics > System Log > System Log Server
The following table describes the items in the previous figure.
Item
Server Address
Server Port
Severity
EKI-9226G Series User Manual
Description
Click the drop-down menu to select the severity level for local log
messages.
The level options are:
emerg: Indicates system is unusable. It is the highest level of

severity
alert: Indicates action must be taken immediately

 crit: Indicates critical conditions
error: Indicates error conditions

warning: Indicates warning conditions

notice: Indicates normal but significant conditions

info: Indicates informational messages

debug: Indicates debug-level messages

Click Apply to save the values and update the screen.
Description
Enter the IP address of the log server.
Enter the Udp port number of the log server.
Click the drop-down menu to select the severity level for local log
messages. The default is emerg.
The level options are:
emerg: Indicates system is unusable. It is the highest level of

severity
alert: Indicates action must be taken immediately

crit: Indicates critical conditions

 error: Indicates error conditions
warning: Indicates warning conditions

notice: Indicates normal but significant conditions

 info: Indicates informational messages
debug: Indicates debug-level messages

129