Link Aggregation; Figure 4.6 Monitoring > Port Monitoring > Port Utilization - Advantech EKI-9226G Series User Manual

6xrj45 + 20xsfp port full gigabit l2 managed switch
Table of Contents

Advertisement

The ensuing table for Ether-Like MIB Counters settings are informational only:
dot3StatsAlignmentErrors, dot3StatsFCSErrors, dot3StatsSingleCollisionFrames,
dot3StatsMultipleCollisionFrames, dot3StatsDeferredTransmissions, dot3StatsLate-
Collisions, dot3StatsExcessiveCollisions, dot3StatsFrameTooLongs, dot3StatsSym-
bolErrors, dot3ControlInUnknownOpcodes, dot3InPauseFrames and
dot3OutPauseFrames.
The ensuing table for Rmon MIB Counters settings are informational only: ether-
StatsDropEvents, etherStatsOctets, etherStatsPkts, etherStatsBroadcastPkts, ether-
StatsMulticastPkts, etherStatsCRCAlignErrors, etherStatsUnderSizePkts,
etherStatsOverSizePkts, etherStatsFragments, etherStatsJabbers, etherStatsColli-
sions, etherStatsPkts64Octets, etherStatsPkts65to127Octets, etherStatsPkts128-
to255Octets, etherStatsPkts256to511Octets, etherStatsPkts512to1023Octets and
etherStatsPkts1024to1518Octets.
4.3.3.2
Port Utilization
To access this page, click Monitoring > Port Monitoring > Port Utilization.
Figure 4.6 Monitoring > Port Monitoring > Port Utilization
The following table describes the items in the previous figure.
Item
Refresh period
IFG
4.3.4

Link Aggregation

The Link Aggregation function provides LAG information for each trunk. It displays
membership status, link state and membership type for each port.
To access this page, click Monitoring > Link Aggregation.
The ensuing table for Link Aggregation Group Status settings are informational
only: LAG, Name, Type, Link State, Active Member and Standby Member.
The ensuing table for LACP Information settings are informational only: LAG, Port,
PartnerSysId, PnKey, AtKey, Sel, Mux, Receiv, PrdTx, AtState and PnState.
EKI-9226G Series User Manual
Description
Click the drop-down menu to select and designate a period (second
intervals) to refresh the information (TX and RX) listings.
Click the drop-down menu to enable or disable the Interframe Gap
(IFG) statistic.
31

Advertisement

Table of Contents
loading

Table of Contents