Figure 4.114 Management > Power Over Ethernet > Poe Port Settings - Advantech EKI-9226G Series User Manual

4.9.3.2 PoE Port Settings
The PoE Port Settings page allows you to configure the port status, its power limita-
tions, legacy mode status, and power limit settings.
To access this page, click Management > Power Over Ethernet > PoE Port Set-
tings.
Figure 4.114 Management > Power Over Ethernet > PoE Port Settings
The following table describes the items in the previous figure.
Item
Port
Enabled
Power Limit From
Classification
Legacy Mode
Priority
Power Limit
Apply
The ensuing table for PoE Information settings are informational only: Port, Enable
State, Power Limit From Classification, Priority, Legacy and Power Limit (W).
4.9.3.3 PoE Port Status
To access this page, click Management > Power Over Ethernet > PoE Port Status.
The ensuing table for PoE Port Status settings are informational only: Port, Current
(mA), Voltage (V), Power (W) and Temp. (°C).
EKI-9226G Series User Manual
Description
Click the drop-down menu to select a PoE port.
Select Enabled or Disabled to designate the PoE port function by
ports.
Select Enabled or Disabled to designate the power limit classifica-
tion.
Select Enabled or Disabled to designate the legacy mode option for
the port.
Click the drop-down menu to configure the power supply priority: Crit-
ical, Low, Medium or High. Default is Low.
Enter a number to set the port power current limitation to be given to
the Powered Device (PD)
Click Apply to save the values and update the screen.
109