Figure 4.28 L2 Switching > Q-In-Q > Port Settings - Advantech EKI-9226G Series User Manual

4.5.5.2 Port Settings
The Port Settings page allows you to define the outer PVID and outer mode for a
selected port.
To access this page, click L2 Switching > Q-in-Q > Port Settings.
The following table describes the items in the previous figure.
Item
Port Select
Outer PVID
Outer Mode
Apply
The ensuing table for QinQ Port Information settings are informational only: Port,
Outer PVID and Outer Mode.
Figure 4.28 L2 Switching > Q-in-Q > Port Settings
Description
Enter the switch port (part of VLAN configuration) to configure the
selection as a tunnel port.
Enter the Port VLAN ID (PVID) to assigned the native VLAN ID. All
untagged traffic coming in or out of the 802.1Q port is forwarded
based on the PVID value
Click the drop-down menu to select between UNI or NNI role.
UNI: Selects a user-network interface which specifies communi-

cation between the specified user and a specified network.
NNI: Selects a network-to-network interface which specifies

communication between two specified networks.
Click Apply to save the values and update the screen.
50 EKI-9226G Series User Manual