Erps; Figure 4.57 L2 Switching > Loopback Detection > Port Settings; Figure 4.58 L2 Switching > Erps > Erps Settings - Advantech EKI-9226G Series User Manual

4.5.13.2 Port Settings
The Port Settings page allows you to select ports that are detected by the loopback
detection function and configure their status (enabled or disabled).
To access this page, click L2 Switching > Loopback Detection > Port Settings.
Figure 4.57 L2 Switching > Loopback Detection > Port Settings
The following table describes the items in the previous figure.
Item
Port Select
Enabled
Apply
The ensuing table for Loopback Detection Port Information settings are informa-
tional only: Port, Enable State and Loop Status.
4.5.14

ERPS

4.5.14.1 ERPS Settings
To access this page, click L2 Switching > ERPS > ERPS Settings.
The following table describes the items in the previous figure.
Item
State
Apply
The ensuing table for Information settings are informational only: ERPS State.
EKI-9226G Series User Manual
Description
Enter the port to define the local loopback detection setting.
Select Enabled or Disabled to setup the Loopback Detection func-
tion.
Click Apply to save the values and update the screen.
Figure 4.58 L2 Switching > ERPS > ERPS Settings
Description
Click Enabled or Disabled to enable ERPS settings.
Click Apply to save the values and update the screen.
69