Removing Sfp Modules; Figure 2.6 Removing A Fiber Optic Cable To A Transceiver; Figure 2.7 Removing An Sfp Transceiver - Advantech EKI-9226G Series User Manual

2.6.2

Removing SFP Modules

To disconnect an LC connector, use the following guidelines:
1. Press down and hold the locking clips on the upper side of the optic cable.
2. Pull the optic cable out to release it from the transceiver.

Figure 2.6 Removing a Fiber Optic Cable to a Transceiver

3. Hold the handle on the transceiver and pull the transceiver out of the slot.
Note!
Replace the dust plug on the slot if you are not installing a transceiver.
The dust plug protects hardware from dust contamination.
EKI-9226G Series User Manual

Figure 2.7 Removing an SFP Transceiver

13
Handle