Advertisement
3.
To select the DIAGNOSTIC TEST option from the DIAGNOSTICS MENU, set
the highlight bar to 1 , and press Enter . The following screen appears:
TOSHIBA personal computer TXXXX DIAGNOSTICS
version X.XX (c) copyright TOSHIBA Corp. 19XX
DIAGNOSTIC TEST MENU :
1 - SYSTEM TEST
2 - MEMORY TEST
3 - KEYBOARD TEST
4 - DISPLAY TEST
5 - FLOPPY DISK TEST
6 - PRINTER TEST
7 - ASYNC TEST
8 - HARD DISK TEST
9 - REAL TIMER TEST
10 - NDP TEST
11 - EXPANSION TEST
88 - ERROR RETRY COUNT [FDD & HDD]
99 - EXIT TO DIAGNOSTICS MENU
Refer to Sections 3.4 through 3.14 for detailed descriptions of each Diagnostic
Test (1 through 10). Function 88 sets FDD and HDD error retry count. Function
99 exits to the Diagnostic Menu.
Select an option to execute and press Enter . The following message appears:
4.
SYSTEM TEST
SUB-TEST
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS
SUB-TEST MENU :
01 - ROM checksum
02 - HW status
03 - ROM Version check
04 - EEPROM ID check
99 - Exit to DIAGNOSTIC TEST MENU
3-4
XXXXXXX
: XX
ERROR COUNT : XXXXX
READ DATA
: XXXXXX
STATUS
↑ ↓ → ←
: Select items
Enter
: Specify
Esc
: Exit
TXXXX DIAGNOSTIC TEST VX.XX
[Ctrl] + [Break] ; test end
[Ctrl] + [C]
: XX
: XXX
↑ ↓ → ← : Select items
Enter
: Specify
Esc
: Exit
T4700CS, T4700CT, T4800CT
; key stop
Advertisement
