Advertisement
6.
Remove two M2x6 screws securing the PCMCIA slot 2 connector board at the
corners. Do not remove the two screws at the middle edges of the board (figure
4-37).
7.
Disconnect the two PCMCIA slot 2 connectors from the lower system board
and lift out the PCMCIA slot 2 connectors board (figure 4-37).
Figure 4-37 Removing the PCMCIA slot 2 connector board
8.
Disconnect the speaker, RTC battery, and BPQP port cable from the each
connector of the PCMCIA slot 2 connector board (figure 4-38).
Figure 4-38 Disconnecting the speaker, RTC battery, and BPQP port cable
T4700CS, T4700CT, T4800CT
4 - 3 7
Advertisement
