Advertisement
4.4
Optional PCMCIA Card
Removing an Optional PCMCIA Card
The T4700CS/T4700CT/T4800CT has two PCMCIA slots: one for a card up to 5.0 mm (slot
2) and one for a card up to 16 mm (slot 1). To remove optional PCMCIA cards, follow the
steps below and refer to figures 4-4 through 4-6:
1.
Turn off the power to the T4700CS/T4700CT/T4800CT. Disconnect the AC
adapter, power cord and all external cables connected to the T4700CS/T4700CT/
T4800CT.
2.
Remove the battery pack as described in section 4.2.
3.
To remove a card from the PCMCIA card slot 2 (center), pull up the cover to the
slot to expose the card.
4.
Push the eject button to pop the card slightly out, then grasp the card and pull it
completely out (figure 4-4).
5.
To remove a card from the PCMCIA card slot 1, slip your fingernail or a thin
object under the notch at the top of the cover and snap off the cover (figure 4-5).
Figure 4-5 Removing the PCMCIA card slot 1 cover
T4700CS, T4700CT, T4800CT
Figure 4-4 Removing the card from the PCMCIA card slot 2
4-7
Advertisement
