Advertisement
4.8
Status Indicator Panel
Removing the Status Indicator Panel
To remove the T4700CS/T4700CT/T4800CT's status indicator panel, follow the steps below
and refer to figure 4-16.
1.
Turn off the power to the T4700CS/T4700CT/T4800CT. Disconnect the AC
adapter, power cord and all external cables connected to the T4700CS/T4700CT/
T4800CT.
2.
Remove the battery pack, optional memory card, optional PCMCIA card, HDD
pack and top cover as described in sections 4.2, 4.3, 4.4, 4.5 and 4.6.
3.
Remove the tape securing the status indicator panel cable.
4.
Disconnect the status indicator panel cable from PJ6 on the upper system board
and lift the panel out of its brackets (figure 4-16).
T4700CS, T4700CT, T4800CT
Figure 4-16 Removing the status indicator panel
4-17
Advertisement
