Advertisement
Procedure 1
Power Status Check on Status Indicator Panel
The Status Indicator Panel displays the status of the following power related items:
AC adapter or Desk Station IV connection status
System power on status
Remaining battery power
The Status Indicator Panel displays the remaining battery power as shown in table 2-1.
Battery
Not installed
Installed
NOTE: The power supply microprocessor monitors the status of the power
supply. When it detects an error, the error is displayed on the Status Indicator Panel.
The status indicator panel will display the error status or other message. Perform the follow-
ing procedures.
1.
Install the battery pack.
2.
Attach the AC adapter to DC IN 18 V.
Check the following items:
If DC IN icon does not light, go to Procedure 2.
If the battery capacity status does not appear, or battery capacity percent does not
change, go to Procedure 3.
If the "P**" message appears on the battery capacity status area, perform Check 1.
Check 1
Read the error status in the battery power indicator on the status indicator panel.
Status
P0*
P1*
P2*
P3*
P4*
P5*
P6*
P8*
2-6
Table 2-1 Battery power
AC adapter
Battery Power (Status Indicator Panel)
–
Doesn't display
Not connected
Time or percent (selected in Setup program)
Connected
Only percent
Table 2-2 Outline of power supply error
Source of Error
AC Adapter or Desk Station IV error
Battery error
VCC Output error
B3V Output error
12V Output or M12V Output error
Power Supply Microcomputer error
Power On error
Environment
T4700CS, T4700CT, T4800CT
Advertisement
