Advertisement
Installing the Display Mask
1.
Set the display mask in place and secure the snaps beginning with the three snaps
in the display supports (two in the larger support and one in the small support
(figure 4-42).
2.
Continue along the bottom of the display (two snaps), along the sides (three
snaps) and across the top (six snaps) (figure 4-42).
3.
Secure the cover with two M2.5x6 screws at the top corners (figure 4-42).
4.
Attach the two rubber cushions at each top corner to cover the screws (figure 4-
42).
5.
Install the top cover and battery pack as described in sections 4.6 and 4.2.
T4700CS, T4700CT, T4800CT
4 - 4 3
Advertisement
