Advertisement
3.
Connect the backup battery cable to PJ13 on the upper system board. Wrap the
microphone cable under the backup battery connector and bring it back in front
of the microphone to connect it to PJ15 on the upper system board (figure 4-20).
4.
Lay the backup battery and cables in place on the computer and secure them
with tape (figure 4-20).
5.
Install the top cover, HDD pack, optional PCMCIA card, optional memory card
and battery pack as described in sections 4.6, 4.5, 4.4, 4.3 and 4.2.
T4700CS, T4700CT, T4800CT
Figure 4-20 Installing the backup battery
4-21
Advertisement
