Advertisement
4.20 T4700CS FL Inverter Cable, Display Cable
Removing the FL Inverter Cable, Display Cable
To remove the T4700CS's FL inverter cable, display cable, follow the steps below and refer
to figures 4-48 and 4-49.
1.
Turn off the power to the T4700CS. Disconnect the AC adapter, power cord and
all external cables connected to the T4700CS.
2.
Remove the battery pack, top cover, display mask, FL inverter board, LCD mod-
ule, and FL as described in sections 4.2, 4.6, 4.16, 4.17, 4.18 and 4.19.
3.
Remove the tape, securing the FL inverter cable on display cover (figure 4-48).
4.
Disconnect the FL inverter cable from PJ2 from upper system board (figure 4-
48).
Figure 4-48 Removing the FL inverter signal cable (T4700CS)
T4700CS, T4700CT, T4800CT
4-51
Advertisement
