Advertisement
Installing the Status Indicator Panel
To install the T4700CS/T4700CT/T4800CT's status indicator panel, follow the steps below
and refer to figures 4-16.
1.
Connect the status indicator panel cable to pressure plate connector (PJ6) on
the upper system board (figure 4-16).
2.
Set the status indicator panel in the upper system board cover, making sure it is
seated securely in its brackets. Note that a fold is not built into the status indica-
tor panel cable. Let the cable bend naturally when you seat the panel; do not try
to fold the cable (figure 4-16).
3.
Secure the status indicator panel cable with tape.
4.
Install the top cover, HDD pack, optional PCMCIA card, optional memory card
and battery pack as described in sections 4.6, 4.5, 4.4, 4.3 and 4.2.
4-18
T4700CS, T4700CT, T4800CT
Advertisement
