Advertisement
Installing the T4700CS FL Inverter Board
To install the T4700CS's FL inverter board, follow the steps below and refer to figure 4-43.
1.
Connect the FL inverter cable to CN1 on the inverter board and the FL cables
to CN2 (figure 4-43).
2.
Route the cables so they are not pinched by the FL inverter board, display
hinge or other component.
3.
Replace the FL inverter board and secure it with the two M2.5x6 screws (figure
4-43).
4.
Install the display mask, top cover, and battery pack as described in sections 4.16,
4.6 and 4.2.
T4700CS, T4700CT, T4800CT
4-45
Advertisement
