Advertisement
2.6
Hard Disk Drive Troubleshooting
To determine if the hard disk drive is functioning properly, perform the procedures below
starting with Procedure 1. Continue with the other procedures as instructed.
Procedure 1:
Procedure 2:
Procedure 3:
Procedure 4:
Procedure 5:
Procedure 6:
CAUTION: The contents of the hard disk will be erased when the HDD troubleshoot-
ing procedures are executed. Transfer the contents of the hard disk to a floppy disk(s)
using the Toshiba MS-DOS BACKUP command. Refer to the Toshiba MS-DOS
Manual for more information about how to perform the BACKUP command.
T4700CS, T4700CT, T4800CT
Partition Check
Message Check
Connector Check
Format Check
Diagnostic Test Program Execution Check
Replacement Check
2-25
Advertisement
