Advertisement
3.19 Log Utilities
3.19.1
Function Description
This function logs error information generated while a test is in progress and stores the results
in RAM. Data can be stored on a floppy disk or output to a printer. If power is turned off,
the error information will be lost. Error information is displayed in the following order:
1.
Error count (CNT)
2.
Test name (TS-NAME)
3.
Subtest number (TS-NAME)
4.
Pass count (PASS)
5.
Error status (STS)
6.
FDD/HDD or memory address (ADDR)
7.
Write data (WD)
8.
Read data (RD)
9.
HDC status (HSTS)
10.
Error status name ( ERROR STATUS NAME)
3.19.2
Operations
1.
Select 5 in the DIAGNOSTIC MENU and press Enter to log error information
into RAM or a floppy disk. Error information is displayed in the following format:
XXXXX ERRORS
CNT TS-NAME PASS STS ADDR
001 FDD 02 0000
001 FDD 01 0000
Subtest number
Test name
Error count
name
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
3-42
103 00001
180 00001
Address
Error status
Pass count
WD RD HSTS [STATUS NAME]
00 00
FDD - WRITE PROTECTED
00 00
FDD - TIME OUT ERROR
HDC status
Read data
Write data
Error status
T4700CS, T4700CT, T4800CT
Advertisement
