Advertisement
(i)
NOTES:
(j)
NOTE: If you turn the T4700CS/T4700CT/T4800CT on while press-
ing the F10 key, it attempts to load the operating system in the reverse
order that you set by using this option. The option setting is not
affected by pressing the F10 key.
(k)
T4700CS, T4700CT, T4800CT
Hotkey
This option enables or disables the hotkeys.
Enabled
Enables hotkeys. (This is the default.)
Disabled
Disables hotkeys.
1. The following hot keys do not work in an operating system
environment other than MS-DOS or Windows 3.0/3.1
Enhanced mode. If the T4700CS/T4700CT/T4800CT is run
ning in such environment, you must set this option to Disable.
The other hotkeys, however, work in any operating system
environment.
Fn + F1 Instant password
Fn + F2 Power save mode
Fn + F3 Resume mode
Fn + F5 Display device
2. If you use the hot keys in Windows 3.0/3.1 enhanced mode
environment, you need to install the WRESUME drivers. For
more information, see the User's T4700CS/T4700CT/T4800CT
Reference Manual.
Boot Priority
This option specifies the priority of the disk drive from which the
computer attempts to load the operating system when you turn it on .
FDD → HDD
HDD → FDD
Sound I/O address
This option enables or disables the sound system. When the sound
system is enabled, you can select the sound I/O base address.
0530H
0604H
0E80H
Disabled
If you enable this option, the OPTION sub-window appears.
FDD A → FDD B → HDD
HDD → FDD A → FDD B
3-61
Advertisement
