Advertisement
5.
Remove the one M2.5x6 screw, securing the display hinge and one M2.5x4 screw
securing the ground cable (figure 4-55).
6.
Remove the display hinge and lift off the display cable (figure 4-55).
Figure 4-55 Removing the display cables (T4700CT/T4800CT)
Installing the FL Inverter Cable, Display Cable
To install the T4700CT/T4800CT's FL inverter cable, display cable, follow the steps below
and refer to figures 4-54 and 4-55.
1.
Fit the display cable to display cover and secure the display hinge with one
M2.5x6 screw. Secure the ground cable to display cover with one M2.5x4
screw (figure 4-55).
2.
Connect the FL inverter cable to CN1 of the FL inverter board and PJ2 of the
upper system board, and secure it with tape to display cover (figure 4-54).
.
3.
Install the TFT color LCD module, display mask, display assembly, top cover, and
battery pack as described in sections 4.2, 4.6, 4.10, 4.16, and 4.21.
4-58
T4700CS, T4700CT, T4800CT
Advertisement
